null

Char-Lynn 2000 Series with 2 Bolt A Flange, 14.9 CID, 1 Keyed Shaft, SAE 10 Ports, 3000 PSI

No reviews yet Write a Review
SKU:
254012
$1,342.40
$1,047.08
You save $295.32

Description

The Eaton 2000 Series motors are available with an integral two speed feature that changes the displacement in a ratio of 1 to 2 and shifts the motor from a low speed high torque (LSHT) mode to a high speed low torque (HSLT) mode. The open center selector valve shifts the speed mode from low to high speed when pilot pressure of 6.9 D Bar [100 D PSI] minimum is applied to the pilot port (6.9 Bar [100 PSI] higher than case pressure). In the high speed mode torque values are approximately one half with twice the speed of the conventional 2000 Series single speed motors. An external two position three way valve is required for shifting the pilot pressure port between signal pressure (HSLT) and low pressure (LSHT) Two speed motors are available with a return line closed center shuttle for closed circuit applications. Low speed high torque mode is the normal position of the speed selector valve. When a differential pressure is supplied to the pilot port and 6,9 Bar [100 PSI] is reached, the selector valve overcomes the return spring force and the spool shifts to the high speed mode. The oil in the opposite side of the spool is drained internally. Pressure between the pilot supply and case drain or return line (depending on open or closed circuit system) must be maintained to keep the motor in the high speed mode. When pilot pressure is removed from the pilot port the pressure in the pilot end of the spool valve is relieved and drained back through this three way valve, the spring force returns the spool valve to LSHT position. Pilot pressure may come from any source that will provide uninterrupted pressure during the high speed mode operation. Pilot pressure 6,9 D Bar [100 D PSI] minimum, up to the full operating pressure of the motor. In normal LSHT operation the Char-Lynn two speed motor will function with equal shaft output in either direction (CW or CCW), the same as the single speed Char-Lynn disc valve motors. However, to prevent cavitation in the HSLT mode, the preferred direction of shaft rotation is counter clockwise (port B pressurized). This unique disc valve is not symmetrical in porting the fluid for the HSLT mode. Consequently, when the pressure is reversed for HSLT CW rotation, cavitation can occur. Installing a restriction (200 psi or more depending on flow) in the hydraulic line that connects port B will prevent cavitation. If you are operating in a critical area and a restriction in the hydraulic line causes concern, these two speed motors can be ordered timed with CW preferred HSLT shaft rotation. Hence, with this option port B will have to be pressurized for CW preferred HSLT shaft rotation. The restriction recommended for the line connecting port B remains unchanged. Finally in closed circuit applications a hydraulic line restriction is not required. Instead, the charge pump can be used to supply and maintain a minimum pressure of 14 Bar [200 PSI].

Specifications

Weight:
30.00 LBS
PSI:
3000
Port Size:
SAE 10
Cubic Inch Displ. (CID):
14.9
Flange O.D.:
4.19 center to center bolt
GPM:
20
Rotation:
Bi-rotational
Mounting:
2 bolt A flange
RPM:
308
Shaft:
1 straight keyed x 1.51 length
Torque:
5850
    *10% off List Price applies to select gear pumps sold by Bailey International LLC on BaileyHydraulics.com and is subject to our terms and conditions. This offer excludes discontinued or overstock products currently on sale, drop shipped items, custom products, and previous orders. This offer expires at 11:59 PM Eastern Time on March 29, 2024, and may not be used with any other negotiated account-based discount, coupon or promotion. Please contact your Bailey representative for details.