Double acting hydraulic power unit with free flow in extended, controlled flow in return. This unit's end-head has been updated to make testing and relief adjustment much easier. The DC motor is painted and a plastic cover is included for protection from the elements. The orientation of the suction pick-up tube allows dual mounting - vertical or horizontal. A wide strainer and strong magnet are used to prevent  system contamination. The 2-button pendant remote is prewired and comes with a 10' cord that includes a male and female quick-disconnect. A lock-out function has been added to the remote so that the “up” and “down” functions cannot be activated at the same time. The porting is marked “A” for power up and “B” for power down. All electrical wires pigtail and can be grounded to the chassis via the end-head. Solenoid valve wires are secured internally in the coil for protection. All units are tested before shipping.

Features:

• GPM: 1.2
• Pump: 2.1 cc/r
• Port Size: SAE 6
• PSI: 2,800
• Relief: 1,500
• Mounting: Dual, vertical or horizontal 
• Tank Size: Poly 8 qt. effective volume
• Valving: Solenoid Operated; 4-way, 2 Position; 2-way, 2 Position Length: 19.5”
• Width: 7”
• Height:  7”

*Note, the ground battery cable contacts to the open hole labeled "GND" on the manifold. The battery power cable connects to the starting solenoid where the "red" wire from the remote is located (see drawing).