Description
The BME hydraulic motor features an advanced geroler gear set design, making it suitable for high-pressure, high-efficiency, low-speed applications. The needle bearing design allows this motor to withstand higher axial and radial forces. The advanced high-speed distribution flow design automatically compensates during operation, ensuring high volume efficiency and smooth operation at low speeds. This Hydro Custom BME Motor, rated at 19.8 GPM, 134 RPM, and 2466 PSI has a 28.99 in3 displacement and 7508.4 lbs-in torque.
- The specifications listed below are for continuous use conditions.
- The optimal operating condition is 1/3 to 2/3 of the continuous use values.
- Most BME models have a counterclockwise rotation (facing the shaft) when port A is pressurized.
- Standard shaft seals rated to 2900 PSI
- Case drains, manifold threads, and radial bearings are not available on this series.
- Due to the design, this series does not have internal check valves.
Full BME Specifications
- Mounting Flange: Magneto, SAE-A 6-Bolt
- Radial Shaft Load: 3527 lbs. (1600 kg)
- Axial Shaft Load: 881 lbs. (400 kg)
- Shaft Seal Rating: 2900 PSI HPSS
- Rotation: Bi-rotational, counterclockwise most common preferred
- Temperature Rating: 100-120°F working, 176°F (80°C) max
- Port Configuration: Parallel
- Port Size: Port Size: SAE 10
Specifications
Brand:
Hydro Custom
Weight:
27.50 LBS
PSI:
2466
Port Size:
SAE 10
CID:
28.99
GPM:
19.8
Inlet Port:
SAE 10
Outlet Port:
SAE 10
Length in Inches:
L - 185, L1 - 5.64
Mounting:
Magneto Mount
RPM:
134
Shaft:
1 1/4" Spline 14-Tooth
Torque:
7508.4
