BMEW Hydraulic Motor: 18.31 CID, 1 1/4" Taper 1:8 Parallel Key Shaft, 2900 PSI, Parallel SAE 10 Ports

The BMEW hydraulic motor features an advanced geroler gear set design, making it suitable for high-pressure, high-efficiency, low-speed applications. The needle bearing design allows this motor to withstand higher axial and radial forces. The advanced high-speed distribution flow design automatically compensates during operation, ensuring high volume efficiency and smooth operation at low speeds. This Hydro Custom BMEW Motor, rated at 19.8 GPM, 212 RPM, and 2900 PSI has a 18.31 in³ displacement and 5576.8 lbs-in torque.

• The specifications listed below are for continuous use conditions.
• The optimal operating condition is 1/3 to 2/3 of the continuous use values.
• Most BMEW models have a counterclockwise rotation (facing the shaft) when port A is pressurized.
• Standard shaft seals rated to 2900 PSI
• Case drains, manifold threads, and radial bearings are not available on this series.
• Due to the design, this series does not have internal check valves.

Full BMEW Specifications

• Mounting Flange: Wheel Mount, SAE-A 6-Bolt
• Radial Shaft Load: 3527 lbs. (1600 kg)
• Axial Shaft Load: 881 lbs. (400 kg)
• Shaft Seal Rating: 2900 PSI HPSS
• Rotation: Bi-rotational, counterclockwise most common preferred
• Temperature Rating: 100-120°F working, 176°F (80°C) max
• Port Configuration: Parallel
• Port Size: Port Size: SAE 10