• Home
  • Lodar Standard Transmitter and Receiver System: 2 Function FET System w/potting to limit vibration

Lodar Standard Transmitter and Receiver System: 2 Function FET System w/potting to limit vibration

(0) No Reviews yet
SKU: 301114
$366.64

This Lodar 2 function system includes FETS, wide band, standard output and a standard transmitter.This Lodar wireless unit is ideal for controlling two functions. Use with an electric winch or hydraulic unit controlled by 12V start up solenoids. Simple wiring and installation provide dependable control. Emergency Stop System (ESS) to ensure personnel safety. Five year pro-rated warranty.

Includes one standard transmitter, one lo-cover, one lanyard, one receiver with wiring harness and glands, and an instruction manual. 

STANDARD TRANSMITTER 

 SPECIFICATION

·         Switch - tactile dome

·         Battery - 9V Alkaline manganese

·         Amps – 20 milliamps operating

 

PROTECTION

·         Reverse polarity - protected

·         IP rating - 55

·         Conformal coating - no

·         Registration codes - over 16 million

 

PERFORMANCE

·         Temp range - 13F to 104F

·         Operational range - 200 ft.

·         Transmitted power - 1mW typical

 

COMPLIANCE

·         EMC - Exceeds ETSI 300 220

·         Modulation - FM

·         Frequencies - 418 MHz F1D

 

RECEIVER

SPECIFICATION

·         Output switching – MOS Field Effect Transistor

·         Volts – 8 VDC minimum, 40 VDC maximum, 12/24 VDC nominal

·         Amps – 15 amps

·         Internal antenna – supplied and fitted

·         External antenna – available accessory

·         Outputs – 2 Oututs

·         Configuration –  RS 232 programming

·         Performance – Simultaneous outputs with programmable interlocks

·         Diagnostics – 5 volts LED

PROTECTION

·         ESR Safety

·         Reverse Polarity

·         Back EMF

·         Conformal Coating

·         Over 16 million registration codes

·         STOP Connetion

WIRING

·         Wiring Loom – 10’ supplied and fitted

·         Cable Gland – supplied and fitted

·         Connections – Screw the terminal into the plug and socket on PCB

ENCLOSURE

·         Weight – 0.3 lbs

·         Lid –  Smoke PVC

·         Base – Black PVC

·         Breather – Gortex fitted in base

·         Mounting – 4 external lugs

·         Fixings – 3/16” not supplied

·         IP Rating – IP67 standard

AMP
15
Type
Hydraulic Power Units
Brand
Pierce

Ratings & Reviews

No reviews available


Be the first to Write a Review