Description
The 2PE gear pump with modular construction is made of an aluminum alloy body, cast iron flanges, and covers. Additionally, floating bushings, axial compensation, and bearings made of anti-friction material enable high volumetric efficiency.
- Made with aluminum alloy body and cast-iron flanges and rear covers.
- Integral gear with 12 teeth.
- Available with flanges, shafts, and ports for the main European, German, and American standards.
- Available supports with bearing.
- Wide range of rear and built-in valves.
- Compact design.
- Displacement: 0.40 (6.5)
- Rotation: CLOCKWISE
- Shaft: 5/8” KEY
Specifications
Weight:
                7.72 LBS
            PSI:
                        3600
                    CID:
                        0.40 - 6.5 cc
                    GPM:
                        3.12
                    Inlet Port:
                        SAE-12
                    Outlet Port:
                        SAE-10
                    Rotation:
                        Clockwise
                    Mounting:
                        SAE-A 2 Bolt
                    RPM:
                        4000
                    Shaft:
                        5/8 in. Key
                    Body Height:
                        3.79
                     
             
             
                             
                             
                             
                             
                             
                             
                 
                 
                 
                 
                 
                