Description
The 3PE series gear pump construction with large area, low-friction bushings provides strength, high efficiency, and long life in severe operating environments. Its advanced bushing and seal configuration optimizes performance even in high temperature and low viscosity conditions.
- Made with an aluminum alloy body, cast iron flanges, and cast-iron rear covers.
- Integral gear with 12 teeth.
- Double Shaft Seal.
- Available with flanges, shafts, and ports for the European, German, and American standards.
- Available supports with bearing.
- Wide range of rear and built-in valves.
- Compact design.
- Displacement: 2.86 (46)
- Mounting: SAE-B 2 BOLT MOUNTING
- Rotation: CLOCKWISE
Specifications
Weight:
                23.00 LBS
            PSI:
                        3500
                    CID:
                        2.86 - 46 cc
                    GPM:
                        22.3
                    Inlet Port:
                        SAE-20
                    Outlet Port:
                        SAE-16
                    Rotation:
                        Clockwise
                    Mounting:
                        SAE-B 2 Bolt
                    RPM:
                        2750
                    Shaft:
                        7/8-13T Spline
                    Body Height:
                        6.24
                     
             
             
                 
                 
                 
                 
                 
                